Mainway Solutions Ski-Doo Replacement Parts

The following products are designed for Ski-Doo Snowmobiles. These products provide an alternative to worn out snowmobile suspensions by offering long lasting quality Greasable Suspension Parts that are guaranteed to ensure better handling and performance.
Item: MSK01Price : $ 189.00
Name :  Greasable Control Arm Bushing Kit
  • This kit fits all front control arms from 2008 to current G4
  • This kit comes with all necessary hardware excluding nuts.
  • Includes the MST04 Kit ( Alignment Pin / 5 Black Caps )
  • Stainless Steel axle pivots with quality bronze bushings.
  • High strength greasable 10.9 zinc plated bolts.
Fitment : Ski-doo 2008 to 2019 XP/XM/XR/XS/RS/G4 models.
Item: MSK01-RSPrice : $ 95.00
Name :  Lower Greasable Lower Control Arm Bushing Kit
  • This is a 1/2 kit for the lower control arms only.
  • If the upper arms have Heim joints or Slicast.
  • Comes with all necessary hardware excluding Nuts.
  • Includes the MST04 kit ( Alignment Pin Only)
  • These kits are made of high quality Materials.
Fitment : Ski-doo 2008 to 2017 RS/XP/XS models
Item: MSK01-1Price : $ 16.00
Name :  4 Longer Greasable Bolt Upgrade
  • You must add this bolt upgrade to the MSK01 Kit if you are using a Two Piece S Module Brace.
  • Includes 2 75mm bolts and 2 80mm bolts.
  • Includes 2 alloy washers for the front bolts.
Fitment : Please note that this product can not be purchased as a separate item but only as an upgrade addition for the MSK01 kit.
Item: MSK01-2Price : $ 8.00
Name :  2 Longer Greasable Bolt Upgrade
  • You must add this bolt upgrade to the MSK01 Kit if you are using a Ski-Doo S-Module Reinforcement Brace.
  • Includes 2 (75mm) bolts with alloy washers.
  • If you are using the new Full One Piece Brace you will require 2 MSK01-2 kits. Front and Back
Fitment : Please note that this product can not be purchased as a separate item but only as an upgrade for the MSK01 kit.
Item: MSK01-3Price : $ 169.00
Name :  REV 07 Greasable Control Arm Bushing Kit
  • This kit fits all Rev chassis control arms from 2003 to 2007
  • This kit comes with all necessary hardware including nuts.
  • Includes the MST04 Kit ( Alignment Pin / 8 Black Caps )
  • Stainless Steel axle pivots with quality bronze bushings.
  • High strength greasable 10.9 zinc plated bolts.
Fitment : Ski-doo 2003 to 2007 Rev models
On Sale: Reg Price $189.00
Item: MSK02Price : $ 140.00
Name :  R-Motion Greasable Swing Arm Bushing Kit
  • This kit comes with all necessary hardware to repair 1 Front Arm.
  • New Axles, Bushings, Stainless steel shims and washers
  • These axles have been Type #3 hard black anodized for longevity
  • High quality greasable bolts with grease fittings
Fitment : Ski-doo 2013 to current 2019 Platform with 128" to 137" R-Motion Suspension
On Sale: Reg Price $150.00
Item: MSK02-RSPrice : $ 75.00
Name :  RS Greasable Swing Arm Bushing Kit
  • This is a 1/2 kit only for the lower pivot point at the rails.
  • This kit fits 600RS platforms.
  • Makes these two locations greasable.
Fitment : Ski-doo 2011 to 2017 600 RS non consumer platform
Item: MSK02-1Price : $ 140.00
Name :  SC-5 Greasable Swing Arm Bushing Kit
  • This kit comes with all necessary hardware to repair 1 Front Arm.
  • New Axles, Bushings, Stainless steel shims and washers
  • These axles have been Type #3 hard black anodized for longevity
  • High quality greasable bolts with grease fittings
Fitment : Ski-doo 2008 to current 2019 Platform with 120” to 137" SC5 Suspension
On Sale Reg: $150.00
Item: MSK02-2Price : $ 150.00
Name :  R-Motion 120
  • Fits 2012 to 2016 R-Motion Short Tracks
  • Relocation of inside idler wheels is required.
  • 1 Hole must be drilled in slider rails.
  • This kit comes with all necessary hardware to repair the front arm and relocate the idler wheel.
Fitment : Ski-doo 2012 to 2016 MXZX, XRS 120" R-Motion models
Item: MSK03Price : $ 111.25
Name :  R-Motion Greasable Rocker Arm
  • This Rocker Arm is ready for installation.
  • Both axles and bushings are greasable.
  • New stainless steel upper axle is included.
Fitment : Ski-doo 2012 to 2019 R-Motion Suspensions
NOTE ⇒ Temporarily Out of Stock
Item: MSK03-RSPrice : $ 18.00
Name :  RS Rocker Arm Bushing Kit
  • Full length Bushings for long lasting results.
  • 2X the support from OEM.
  • Repairs both rocker arm levers.
Fitment : Ski-doo 2011 to 2017 600 RS Platform
Item: MSK03-1Price : $ 22.25
Name :  SC-5 Rocker Arm Bushing Kit
  • Full length Bushings for long lasting results.
  • New bolt assembly for the throttle rods / Link Rods.
  • If your suspension has aluminum rocker arms this kit will fit
  • Repairs both Rocker Arms
Fitment : Ski-doo 2005 to 2013 SC-5, 2008 to 2010 600 RS 2015. All MXZ Sport models to 2019
Item: MSK04Price : $ 21.00
Name :  R-Motion Rear Link Arm Bushing Kit
  • Repair kits for the rear upper arm where the throttle rods connects.
  • Works with or without quick adjust suspension
  • Takes a few minutes to install both sides.
  • New 10.9 bolt hardware with S/S grease fittings.
Fitment : Ski-doo 2012 to 2019 with R-Motion Suspensions
Item: MSK04-RSPrice : $ 12.00
Name :  600RS Rear Link Arm Bushing Kit
  • Full length Bushings for long lasting results
  • 2X the support from OEM
  • Makes this point Greasable
Fitment : Ski-doo 2008 to 2017 600 RS platform
Item: MSK04-1Price : $ 17.25
Name :  SC-5 Rear Link Arm Bushing Kit
  • Repair kits for the rear upper arm where the throttle rods connects.
  • Longer bushings to support the axle.
  • New 10.9 bolt hardware and S/S grease fitting.
  • All kits will have a 90MM long bolts included.
Fitment : Ski-doo 2008 to 2019 SC-5 Suspensions.
Item: MSK05Price : $ 22.00
Name :  R-Motion Rear Extension Arm Bushing Kit
  • This kit will restore clearance in the Extension Arm bushings.
  • These kits come with 12.9 Cap bolts.
  • Repair them before you have to replace them.
  • Repairs both Arms.
Fitment : Ski-doo 2012 to 2019 with R-Motion Suspension.
Item: MSK05-RSPrice : $ 55.00
Name :  600RS Rear Upper Arm Bushing Kit
  • Kit comes with all hardware to repair this pivot point.
  • Stainless Axles, Bronze Bushings & Greasable Bolts.
  • Makes these 2 locations Greasable.
Fitment : Ski-doo 2008 to 2019 600 RS Platform
Item: MSK05-2Price : $ 60.00
Name :  R-Motion Rear Extension Arm Axle Kit
  • All stainless steel axles so they will not rust.
  • No need for the thin wrench in between the rail
  • 22mm wrench. Hold the Axle nut on the outside.
  • Provides closer tolerance for better longevity.
  • No need to replace the whole arm when the OEM nut fails.
Fitment : Ski-doo 2012 to current R-Motion Aluminum Extension Arms.
Item: MSK05-1Price : $ 55.00
Name :  SC-5 Rear Upper Arm Bushing Kit
  • All SC-5 up-graded rear arm with a Hex Head upper bolt.
  • If you have an Allen Socket Cap Screw, this kit will not work.
  • Kit comes with all hardware to repair this pivot point.
  • Stainless Axle, Bronze Bushings & Greasable Bolts.
  • Makes these 2 locations Greasable
Fitment : Ski-doo 2008 to 2019 SC-5 models with 191775 axle. XP, XR, Sport
Item: MSK05-XMPrice : $ 47.00
Name :  Swing / Rear Upper Arm Axle Kit
  • All stainless steel axles so they will not rust.
  • Proper fitment for G4 and XM Models
  • Replaces the G4 Summit OEM aluminum axle which is too small
  • 2 new OEM style bushings
  • Replaces 191262 / 194970 / 191000 axles and 191556 bushing
Fitment : Ski-doo 2010 - 2019 Summit / Freeride & BC 146
Item: MSK06Price : $ 8.00
Name :  Aluminum Link Rod Insert Repair Kit
  • Use these little bushing inserts if you have aluminum Link Rods.
  • They will restore oval worn holes saving you money in the long run.
  • Repairs both rods.
Fitment : Ski-doo 2010 - 2019 Summit / Freeride & BC 146" up
Item: MSK07Price : $ 25.00
Name :  Stabilizer Bushing and Axle Kit
  • Use this kit if your sled uses a 72602 / 72059 stabilizer bar.
  • Provides three times the support length.
  • 1 and 1/2" of support compared to 1/2".
Fitment : Ski-doo 2008 to 2019 models using 72064 plastic bushing.
Item: MSK07-1Price : $ 25.00
Name :  Stabilizer Bushing and Axle Kit SE/LE Models
  • GT LE & SE
  • Use this kit if your sled uses a 72444 stabilizer bar.
  • Provides three times the support length.
  • 1 and 1/2" of support compared to 1/2".
Fitment : Ski-doo 2009 - 2019 models using 72445 plastic bushing.
Item: MSK07-2Price : $ 25.00
Name :  Stabilizer Bushing and Axle XM / G4
  • Summit / Freeride /
  • Use this kit with 72785 / 73609 / 72847 stabilizer bar.
  • Provides three times the support length.
  • 1 and 1/2" of support compared to 1/2".
Fitment : Ski-doo 2010 - 2019 models using 72786 plastic bushing.
Item: MSK08Price : $ 69.00
Name :  G4 Rack Steering Bushing and Axle Kit
  • New stainless steel axles that fit and will not rust.
  • Longer Bushings which provide double the support.
  • Stainless grease fittings.
  • Reduce G4 steering play with these 2 pivot points alone.
Fitment : Ski-doo 2017 to 2019 G4 Chassis with rack Steering.
Item: MST01Price : $ 27.00
Name :  Swing Arm Bushings Installation / Removal Tool
  • This tool works for SC-4, SC-5 and R-Motion Suspensions
  • This tool will remove and replace all swing arm bushings including OEM ones.
  • Made of B7 threaded rod and alloy nuts
  • Makes replacing swing arm bushings an easy job
  • Can be used for other bushing installation as well
Fitment : all SC-4 , SC-5 and R-Motion Suspensions
Item: MST04Price : $ 0.00
Name :  Alignment Pin / 8 Black Caps included with MSK01-3
  • Included in all Control Arm bushing kits MSK01-3 (5 Caps in MSK01 Kits)
  • Used to align the lower control A-arm stainless steel shims.
  • Black caps to protect and cover the bolt heads.
Fitment :
Item: MST05Price : $ 7.25
Name :  Drill and Tap Kit 1/4 - 28
  • Quality drill and hand tap for installing grease fitting wherever required.
  • Used in all our rear suspension kits.
  • Get you the right drill and the right tap.
Fitment :
Item: MSK16Price : $ 70.00
Name :  T-Motion Delete Bushing Kit (up to 2016)
  • Eliminate the T-Motion heim joint and control your sled reducing the washout while side hilling.
  • Full side support with 1" Stainless Steel Flange Axles and Self-lubricating Bronze Bushings.
  • These bushings press into each other forming a strong flange support with side thrust included.
  • This Bushing Kit is the strongest in design and support for a Single Pivot Point.
Fitment : All ski-doo with heim joint in rear arm 2013 to 2016 (2017 / 2018 use Part # MSK17)
Item: MSK17Price : $ 70.00
Name :  G4 T-Motion Delete Bushing Kit (2017 to current)
  • New Product Sale Price
  • Eliminate the T-Motion heim joint and control your sled reducing the washout while side hilling.
  • Full side support with 1" Stainless Steel Flange Axles and Self-lubricating Bronze Bushings.
  • These bushings press into each other forming a strong flange support with side thrust included.
  • This Bushing Kit is the strongest in design and support for a Single Pivot Point.
Fitment : All ski-doo with heim joint in rear arm 2017 to Current.
Item: MSHK01Price : $ 45.00
Name :  XP/XR (10 hole) Skid Plate Mounting Hardware
  • Our 10 piece skid plate hardware was developed for easy removal of any skid plate. There are 29 pieces of hardware which include a few extra.
  • The lower 6 metal inserts are expandable and easily installed without any special tooling. Install instructions are provided.
  • The special Mainway nutserts are all stainless steel and are used in the plastics only.
  • All machine screws are torx driven for better installation and removal.
Fitment : XP / XR Full Body Skid Plate
Item: MSHK01-1Price : $ 65.00
Name :  XM/XS/XR (14-16 PCS) Skid Plate Mounting Hardware
  • Our 16 piece skid plate hardware was developed for easy removal of any skid plate. There are 42 pieces of hardware which include a few extra.
  • The lower 6 metal inserts are expandable and easily installed without any special tooling. Install instructions are provided.
  • The special Mainway nutserts are all stainless steel and are used in the plastics only.
  • All machine screws are torx driven for better installation and removal.
Fitment : XP / XM / XS Full Body (14) and Extreme Skid Plate (16)
Item: MSHK01-2Price : $ 55.00
Name :  G4 Skid Plate Hardeware Kit
  • Our 12 piece skid plate hardware was developed for easy removal of any skid plate. There are 31 pieces of hardware which include a few extra.
  • The lower 6 metal inserts are expandable and easily installed without any special tooling. Install instructions are provided.
  • The special Mainway nutserts are all stainless steel and are used in the plastics only.
  • All machine screws are torx driven for better installation and removal.
Fitment : G4 Chassis
All funds in Canadian Dollars
Privacy | Terms & Conditions  © Mainway Solutions Inc, 2013-2019.